Founder
Founder of Everett Custom Homes. Named the company after his grandfather, Everett.
Two builders can price the same plans and come back hundreds of thousands of dollars apart, usually because they aren’t estimating the same house. Eric Brown explains how to compare custom home builder proposals in Charlotte: what the drawings leave out, how allowances and specifications differ, how site and foundation risk is handled, and what changes when you compare cost-plus with fixed-price bids.
An electrical service upgrade in a Charlotte home renovation sizes the service to the finished house load and changes the customer-owned equipment so Duke Energy can reconnect after inspection. Meter location, the disconnect, and a separate electrical permit are part of that work.
A foundation evaluation before a Charlotte renovation or addition reads settlement, moisture, the piers and the crawl space, and whether the new load can land on the foundation already there. It is not a home inspection, and it is not a reason to seal the crawl space before the wood and piers have been seen.
Custom millwork for a Charlotte home has to be locked on shop drawings before fabrication: species, profiles, hardware, stairs, built-ins, and finish. Final lengths and undercuts are measured only after the new house or renovated room is closed in.
What does it really cost to build a custom home, add an addition, or undertake a major renovation in Charlotte? Everett Custom Homes shares four real-world construction pricing examples, ranging from $400,000 to over $2 million, and explains why square footage alone doesn't determine the cost of building.
Removing a wall in a Charlotte renovation means finding whether the wall carries load, shoring it before the studs come out, and setting a beam the ceiling can accept. Floor, ceiling, and trim are part of the same job and wait until after the framing inspection.
Seven questions show whether Waxhaw custom home construction quality is being managed before you sign. A useful answer names a person, a document, and a consequence.
How much does it really cost to add onto a house in Charlotte? Eric Brown of Everett Custom Homes explains why square-foot pricing can be misleading, how engineered drawings and subcontractor proposals produce more accurate budgets, and what homeowners should know about structural modifications, unforeseen conditions, and construction costs.
Radon control for a Charlotte custom home is a passive soil-gas stack drawn before the slab or crawl space closes, then a test of that house. A fan is added only if the test calls for one, and a Zone 3 label on the 1993 EPA map is not a reason to skip either step.
Window replacement in a Charlotte renovation is construction inside a wall that is already built. The choice is a unit set into the frame that stays or a full-frame replacement that opens the rough opening, plus a sleeping-room escape path, flashing that can drain the sill, and interior trim rebuilt to the room.
A custom home in Mint Hill is reviewed by the town and by Mecklenburg County. Building permits come from LUESA, and lot size and setbacks follow the water and sewer on the property.
Older homes deserve respect, but age alone does not guarantee quality. Eric Brown shares lessons from Charlotte-area projects and explains how modern engineering, materials and hands-on builder oversight can create a better-performing custom home.
Matching an addition in Charlotte starts with the house already on the lot: floor levels, roof pitch, brick, millwork, and window rhythm. The join is construction, not decoration, especially where water has to leave the wall.
Homeowner decisions shape a custom home’s schedule. Learn when appliances, lighting, cabinets, rough-ins, fireplaces, flooring, and exterior materials need to be selected for a Charlotte build.
A primary suite renovation in a Charlotte home is one construction job, not a bedroom refresh, bath swap, and closet upgrade done in sequence. Structure, plumbing, HVAC, waterproofing, and millwork have to land as a single program.
A beautiful custom home is about more than finishes. Learn how framing, engineered floor systems, structural inspections, water management, HVAC design, sealed attics, humidity control, and other hidden details determine how well a home performs for years to come.
A custom house in Matthews is a two-desk project: Town zoning, overlays, and canopy first, then Mecklenburg County building permits and inspections. Infill lots also have to clear tree rules, Piedmont clay drainage, and any HOA covenants.
Water management in a custom home involves far more than waterproofing a foundation. From window flashing and brick drainage to grading, roof runoff, crawlspaces, retaining walls, and underground drainage, every part of the house and site needs to work together. Eric Brown explains how Everett Custom Homes approaches the details homeowners may never see—but that can matter for decades.
Planning a porch, terrace, screened room, or outdoor kitchen in Charlotte means treating it as construction attached to the house. Structure, flashing, stormwater, and permits come before furniture.
Learn how Everett Custom Homes develops a realistic custom-home budget using engineered plans, professional takeoffs, supplier bids, detailed specifications, allowances, contingencies and open-book cost tracking.
A custom bathroom renovation in a Charlotte home is construction work, not a fixture swap. Waterproofing, plumbing, electrical, ventilation, and permits have to be right before finishes go in.
Everett Custom Homes does not use a library of stock floor plans. Every ground-up custom home is designed specifically for the client and property, working with local architects and interior designers to create a truly one-of-one home.
Marvin is in Union County, not Mecklenburg. Confirm Village zoning, HOA covenants, and a county soil evaluation before you design, especially on well and septic lots.
A high-end HVAC system is only as good as the design behind it. Eric Brown explains how Everett Custom Homes approaches proper sizing, sealed attics, heat pumps, humidity control, fresh-air ventilation and indoor air quality in Charlotte custom homes.
Sometimes the house is not really what makes a property special - the property is. See how Everett Custom Homes rebuilt an older Weddington-area residence from the foundation up into an essentially new 8,650-square-foot luxury home.
A custom kitchen renovation in a Charlotte home is construction inside a house that already exists. Structure, plumbing, electrical, and ventilation have to be right before millwork goes in.
Building in Myers Park can come with costs you may never see above ground. On one Everett Custom Homes project near Freedom Park, poor soil conditions required more than 144 deep pilings and a structural slab. Here’s why site conditions can have such a major impact on a custom home budget.
A well planned multigenerational suite is a private, apartment-scale wing of one Charlotte custom home. It needs its own entry, HVAC, accessible bath, and enough privacy for two households to share a lot without sharing every hour.
Start with shoreline, floodplain, and soils before you design a house on Lake Wylie. Duke Energy permits, vegetated buffers, flood maps, and well or septic setbacks decide where the home can sit and whether a dock is even eligible.
Why does Everett Custom Homes build sealed, conditioned crawl spaces? In Charlotte’s humid climate, controlling moisture beneath a home helps protect hardwood floors, framing, and indoor air quality. Learn how we combine professional-grade dehumidifiers with HVAC supply air—and why floodplain requirements sometimes call for a different approach.
A historic Charlotte house keeps its character when original windows, millwork, masonry, and porch form are repaired rather than replaced. Structure, mechanical systems, kitchens, and baths can then be updated for daily living.
You can build a highly engineered, exceptionally efficient custom home and then discover that your cell phone barely works once you walk inside. I know because I have dealt with this personally, and several of our clients have pointed out the same problem after moving in.
A custom home addition in Charlotte is a join to a house you already occupy. Confirm the lot, the permits, the existing structure, and how you will live on site before you commit to a floor plan.
Why do ranch homes cost more to build than two-story homes? Compare foundation, roofing, framing, cornice and site costs with a Charlotte builder.
Learn how long it takes to build a custom home in Charlotte, NC, from lot evaluation and architectural design through construction and move-in.
Should you renovate, remodel, add on, or rebuild in Charlotte? Compare costs, structural limits, floodplain concerns, and long-term value.
Before buying land for a custom home in Charlotte, learn how slope, soil, floodplains, drainage, utilities, zoning, and access can affect design and construction costs. custom home lot evaluation Charlotte NC
Building a new custom home starts with a clear vision, the right builder, and a well-planned process. At Everett Custom Homes, we guide homeowners through every step, from design and budgeting to construction, quality control, and final…
“How much does it cost to build a custom home?” is one of the first questions people ask us. It is a fair question. Before buying a lot or developing plans, you want to know what you are getting into.
Custom home builder in South Charlotte NC building on your lot tear downs remodels and presold custom homes designed around your vision
Custom home builder in South Charlotte NC specializing in building on your lot tear downs remodels and presold luxury homes designed around your vision
Learn how designing a luxury home that adapts beautifully to every season in Charlotte NC with seasonal design in mind improves comfort energy efficiency and year-round living.
Who wouldn't want a custom home with a cigar room with advanced ventilation, which allows homeowners to enjoy cigars indoors without lingering smoke, even in cold weather.
Discover how the custom-built GIVERNY home continues to impress buyers years later, proving that timeless design and quality craftsmanship never fade.
Choosing a custom home builder takes more than comparing photographs and prices. Eric Brown explains how to evaluate construction quality, budget transparency, project oversight, and the systems that make a home work.
Discover the advantages of hiring Waxhaw-based custom home builders.
Discover how Everett Custom Homes completed a luxury home renovation in Charlotte NC, transforming a 1987 property into a 2024 modern retreat.
Building a home is more than just bricks and mortar. It is a journey of dreams, a canvas for your lifestyle, and a testament to your taste. In Waxhaw, NC, this journey takes on a special meaning. The town’s charm and natural beauty inspire…
Explore how Everett Custom Homes designs luxury builds across Charlotte neighborhoods like Myers Park, Foxcroft, and Dilworth.
Discover why the barndominium trend in Charlotte, NC is taking off. Everett Custom Homes builds stunning barndominiums that blend rustic charm with modern luxury and spacious, open layouts.
Discover Everett’s Sterling project in Myers Park, a custom home blending wellness, luxury finishes, and modern smart home features.
Building a custom home is very different from buying a house where the floor plan, specifications and homesite have already been determined.
Find tips on what to look out for and expert insights on choosing the most reliable home builder in Charlotte for quality residential construction.